[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4403.0. "Config a RouteAbout" by ODIXIE::GALVEZ () Mon May 12 1997 21:22

    I'm trying to configure 2 RouteAboutes that have Frimware rev 1.1.  Is
    it possible to only configure for lat and mop bridging and IP routing
    only?  Is this done with Qconfig or do I need to use clearvisn to
    configure?  I tried with Qconfig and saw nothing to point me to set up
    what I only need.
    
    	I would like to talk to someone that feels comfortable doing a
    config from scratch.
    
    Thanks,
    
    Art Galvez
    1-800-759-8888 pin # 220092
T.RTitleUserPersonal
Name		DateLines
4403.1Qconfig or Router ConfiguratorSNOFS1::KHOOJEANNIELaziness breeds EfficiencyWed May 14 1997 21:5417
    Hi Art
    
    Qconfig does allow you to set up IP routing and bridging without routing
    any other protocols ...
    
    It prompts you for the WAN links (PPP, Frame Relay etc), and for the IP
    routing parameters and whether you want bridging (Yes).  It also
    prompts you as to whether you want to set up the other protocols such
    as IPX and DECNET (No) and then for the routing protocol (OSPF, RIP).
    
    Alternatively you can use clearVISN Router Configurator which is like a
    graphical version of qconfig.  This is available free on the Digital
    Networks Web.
    
    Regards
    Jeannie