[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4399.0. "MS300: Question about Auto-Configuration" by TBJVOA::OHTANI (NPB-Japan Market Support) Mon May 12 1997 10:12

Hello, I've a quick question about MS300.

MS300 supports or will support Auto-configuration of Full/Half duplex?

Shoichi Ohtani, NPB-J.

T.R Title User Personal
Name Date Lines

4399.1 MS300 port duplex settings NETCAD::HOPPE Wed May 14 1997 12:04 11

T.R	Title	User	Personal Name	Date	Lines
4399.1	MS300 port duplex settings	NETCAD::HOPPE		`Wed May 14 1997 12:04`	11
	>MS300 supports or will support Auto-configuration of Full/Half duplex? I believe the answer to your question is no. Currently, the MS300 supports auto-sensing of the bandwidth (10/100), but does not support auto-negotiation of duplex. The duplex for a port must be set with the console, a telnet session, or the GUI management software that comes with the switch. As far as I know, there is no plan for future hardware versions to support auto-negotiation of duplex.

    >MS300 supports or will support Auto-configuration of Full/Half duplex?
    
    I believe the answer to your question is no.  Currently,
    the MS300 supports auto-sensing of the bandwidth (10/100),
    but does not support auto-negotiation of duplex.  The duplex
    for a port must be set with the console, a telnet session,
    or the GUI management software that comes with the switch.
    
    As far as I know, there is no plan for future hardware
    versions to support auto-negotiation of duplex.