[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4377.0. "cut-through on MS612EX?" by OSLLAV::BJORN (Bj�rn Olav Haugom) Fri Apr 25 1997 10:55

How is the cut-through or store-and-forward switching capabilities of a 
MS612EX enabled? How do the switch, switch between the two operating modes?

Bj�rn Olav Haugom
NPBU Norway
T.RTitleUserPersonal
Name		DateLines
4377.1MS612EX does not support cut-through modeNETCAD::ARVINDFri Apr 25 1997 14:027
    The MS612EX does not support cut-through switching. It is a pure
    store-and-forward switch. So there is no way of enabling cut-through
    mode.
    
    Regards,
    Arvind.