[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4349.0. "MCM V6.0.A Crash" by MIPSBX::"[email protected]" (Youda Kopel) Sun Apr 13 1997 21:28

Hi There ,

I wonder if anyone has seen this :

DEChub900 MS with MAM V5.1 (latest)....One VNswitch 900EE ver 1.5 ( in Slot 8
)
and one DECrepeater 900TM ( in slot 7 as IP services ).

MCM V6.0.A ( CV v1.1.A )running on NT V4.0. When you double click on a RELEASE
LEVER on the backplane ( latching mechanism to remove and install modules )for
UNOCCUPIED slots, MCM crashes with this error :

An application error has occurred and an application error log is being
generated.
hubwatch.exe
Exception: access violation [ 0xc0000005], Address: 0x00162698 .

The customer was able to crash MCM every time in the same pattern.

Any Ideas ???

Many Thanks ,

Youda Kopel ,

NPB Melb / Aust.
  
[Posted by WWW Notes gateway]
T.RTitleUserPersonal
Name		DateLines
4349.1NETCAD::DRAGONThu Apr 24 1997 18:217
    
    Hi,
    
    	We tried this and could not reproduce the problem. Anyone else
        out there able to get this to crash?
    
    Bob