[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4328.0. "MS600 (Multiswitch 600) Questions" by MQOOA::FINUCAN () Wed Apr 02 1997 15:30

    Can somebody shed some light on the following Multiswitch 624 Hub
    configuration.
    
    If I use a MS624 with two fibre optic connections can I configure the
    two fibre links to be redundant?
    
    Has anybody tested this or can verify that it does/doesn't work?
    
    Rob.
T.RTitleUserPersonal
Name		DateLines
4328.1Survey says, yes.NETCAD::GALLAGHERWed Apr 09 1997 10:271
Yes, the Hub 624T supports dual-port redundancy on the fiber links.
4328.2Twisted pair tooPRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceThu Apr 10 1997 09:187
    re : 1
     and for TP ports redundancy work too ?
     under MultiChassis Manager you can do it but may be its unsupported
    
     thanks
    
     JYP
4328.3Yep, twisted pair ports too.NETCAD::GALLAGHERThu Apr 10 1997 10:053
Yes, the TP ports can also be setup to support Dual Port Redundancy.
(I haven't tried this.)
						-Shawn