| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4323.1 | | NETCAD::DOODY | Michael Doody | Mon Mar 31 1997 09:53 | 6 |
| They are manageable. They can be connected, or not, kind of
like the DECrepeater 90FS/TS. Matter of fact, they connect
to the same backplane LANs as the 90FS/TS.
md
|
| 4323.2 | same with 90TS? | NETRIX::"eric gan@bejvc" | eric gan | Mon Mar 31 1997 23:05 | 8 |
| For r1.
>Matter of fact, they connect
>to the same backplane LANs as the 90FS/TS.
does the MS600 only support one LAN on backplane same as 90?
eirc
[Posted by WWW Notes gateway]
|
| 4323.3 | If it does...then... | PTOJJD::DANZAK | Pittsburgher � | Tue Apr 01 1997 22:57 | 15 |
| If it's like the TS (and I think that it is) It connects to:
1.) The "default" LAN, which acts like a blue thinwire etc
2.) ONE Flexchannel. The MAM 'automagically' moves the first
Ethernet flexchannel (green line) to the UPPER connector.
So, if you connect a 90TS to a FLEXlan, additional 90TS/ 90FS
or MS600, can connect to THAT flexlan which has relocated to
the upper connector
That is....IF it works the same as the 90ts/fs etc.
(Does it?)
Duuh/j
|
| 4323.4 | | NETCAD::DOODY | Michael Doody | Wed Apr 02 1997 11:42 | 12 |
| When a 600 module is in the MS600, it can connect to six
flexible ethernets plus 1 "dedicated ethernet" (nee thinwire)
for a total of seven lans. It is a stack with
7 lans/collision domains!
When a 600 module is in the MS900, it behaves the
same as a 90TS i.e. one "dedicated ethernet" and
one flexible ethernet, which is automagically picked
like Jon said.
|
| 4323.5 | And it does work... | LFOIS1::MOUSSU | so unusuaL terM | Mon Apr 07 1997 12:38 | 4 |
| We managed to set up an MS600 such a way last week for the local DECUS
chapter Symposium !...
Regards
Laurent
|
| 4323.6 | disconnect with all of the backplan bus? | USCTR1::16.157.224.151::ERICGAN | NPBU s/s | Fri Apr 11 1997 23:02 | 7 |
| >When a 600 module is in the MS900, it behaves the
>same as a 90TS i.e. one "dedicated ethernet" and
>one flexible ethernet, which is automagically picked
>like Jon said.
Do I have the chance to disconnect with all of the backplane bus?
eric,
|
| 4323.7 | | NETCAD::MOWER | | Sat Apr 12 1997 19:45 | 12 |
| >> > When a 600 module is in the MS900, it behaves the
>> > same as a 90TS i.e. one "dedicated ethernet" and
>> > one flexible ethernet, which is automagically picked
>> > like Jon said.
>>
>> Do I have the chance to disconnect with all of the backplane bus?
Yes, the Stack600 modules, when in a Hub900, can be disconnected from
all backplane LANs.
Carl Mower.
|