| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4313.1 | full duplex supported | NETCAD::PAGLIARO | Rich Pagliaro, Networks BU, HPN | Thu Mar 27 1997 09:38 | 24 |
| <<< IROCZ::USER4:[NOTES$LIBRARY]COMMON_BROUTERS.NOTE;1 >>>
-< Digital Brouters Conference >-
================================================================================
Note 820.1 FULL Duplex operation on EX 1 of 1
NETCAD::PAGLIARO "Rich Pagliaro, Networks BU, HPN" 16 lines 27-MAR-1997 09:22
-< Full Duplex supported >-
--------------------------------------------------------------------------------
The short answer is yes. The VNswitch 900EX Fast Ethernet ports can be
manually configured or auto-negotiate to:
10Base-T Full Duplex
10Base-T Half Duplex
100Base-TX Full Duplex
100Base-TX Half Duplex
During development I tested the VNswitch EX with the DE500-AA and I
verified that it could auto-negotiate to all of the above modes in this
configuration.
Are you sure the the VNswitch is configured correctly. For example, is
auto-negotiation enabled (this is the default state). A more basic
question is are you sure you have the correct type of cable? You need a
cross-over cable when connecting the VNswitch Fast Ethernet ports to
and end station. Also, is auto-negotiation enabled on the DE500-AA?
|
| 4313.2 | all seems good | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Thu Mar 27 1997 11:52 | 9 |
| thanks for your reply,
unfortunatly DE500 and EX seems configured as well,
cable works great as 10 Half and Full and 100 Half but no in
100 full.
any ideas ?
Jean-Yves
|
| 4313.3 | Follow-up answers provided in Common_Brouter Note 820.* | NETCAD::PAGLIARO | Rich Pagliaro, Networks BU, HPN | Thu Mar 27 1997 12:14 | 3 |
| The base note was cross-posted in Common_Brouter Note 820.0. I will
post the rest of my replies to this string only in Common_Brouter 820.*
and I will not cross-post any more of my replies here.
|