[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4291.0. "RMON problem with DECswitch 900EF" by HGOVC::ANDREWFUNG () Tue Mar 18 1997 21:08

    Hello All,
    
    	Recently, I have tried to use RMON manager with DECswitch 900EF.
    But I have found that I cannot install domains in RMON manager except
    the domain "RMON". 
    
    	The following is the equipment configuration I used :
    1. DECswitch 900EF (firmware = v1.7.0R)
    2. MS900 (firmware = V5.0)
    3. Clearvisn v1.0, RMON manager v3.30
    
    
    	The following is the work we have done : 
    
    1. We've checked that the R/W community of both DECswitch 900EF & RMON
        manager. Both of them are already set to "public-rmon".
    
    2. When test button is clicked, the following information is displayed
    :
    
    General Information
    
           IP Address : 16.157.32.21
                 Ping : Not Supported
       Read community : "public-rmon" OK
      Write community : "public-rmon" OK
     Resource manager : Not Supported
    
    Interface Information
    
     Interface number : 4
          Description : FDDI Port 1
       Interface type : fddi(15)
     physical address : (I think this information can be ignored)
    
    System Information
    
          Description : DECswitch 900EF,6-ethernet/fddi switch,HW=v1/2,
                        RO=v0.4,SW=v1.7.0R
    
              Contact : 
              SysName :
             Location :
             Up since : (I think this information can be ignored)
    
    3. We've used Multichassis Manager to make all switch port "RMON
    enabled"
    
    4. We then select the group and click "domain manager". The agent name
    then appears which domain is "RMON". We click the install button and
    select then domain we want to monitor, and OK is selected. The following Warning
    message appears :
    
       Error accessing agent DECswitch, domain "ALL".
       While creatin channel "ALL".
       Error : Entry or group not present in Agent.
       Continue ?
       
       I choose yes to continue, but it still can't install the domain
    proper.
    
    	Can anyone give some advice about this problem to me ?
    
    Rgds,
    Andrew.

T.R Title User Personal
Name Date Lines

4291.1 add suffix "-rmon" only RMON Mgr side ZOTTO::ENYA Yoshiharu Enya, Tokyo Japan Wed Mar 19 1997 01:21 17

T.R	Title	User	Personal Name	Date	Lines
4291.1	add suffix "-rmon" only RMON Mgr side	ZOTTO::ENYA	Yoshiharu Enya, Tokyo Japan	`Wed Mar 19 1997 01:21`	17
	Hi Andrew. > 1. We've checked that the R/W community of both DECswitch 900EF & RMON > manager. Both of them are already set to "public-rmon". Are you set same community name to both ? It's wrong. If you set R/W community name "xxxxxx" to DECswitch900, in RMON Manager side, you must add suffix "-rmon" to that community name, so "xxxxxx-rmon" to access RMON all 9 groups, Try to change community name to "public" in DECswitch900. -- Yoshiharu Enya

Hi Andrew.

>     1. We've checked that the R/W community of both DECswitch 900EF & RMON
>         manager. Both of them are already set to "public-rmon".

Are you set same community name to both ?  It's wrong.

If you set R/W community name "xxxxxx" to DECswitch900,
in RMON Manager side, 
you must add suffix "-rmon" to that community name, so "xxxxxx-rmon"
to access RMON all 9 groups,

Try to change community name to "public" in DECswitch900.

--
Yoshiharu Enya