Conference netcad::hub_mgnt

4279.0. "DNSES cabling?" by OTOOA::JPOND () Fri Mar 14 1997 10:51

Hi 
The following is a note I cross-posted in the MVBLAB::SABLE conference.
I'm not really where I can ask questions regarding the DNSES, so any
pointers would be appreciated.

Thanks,
Jim


            <<< MVBLAB::SYS$SYSDEVICE:[NOTES$LIBRARY]SABLE.NOTE;2 >>>
                      -< SABLE SYSTEM PUBLIC DISCUSSION >-
================================================================================
Note 2554.0                 DNSES cable part number?                  No replies
OTOOA::JPOND                                         15 lines  13-MAR-1997 17:40
--------------------------------------------------------------------------------
    I have a cabling issue with a DNSES. I don't really know of a better
    place to ask this because I've never really found a good conference
    that discusses this sort of thing (if there is, let me know).
    
    Anyway, the DNSES ships with a Y-Cable. The end that plugs into the
    DNSES itself is a 100-pin 2-row male D-style connector, and the other
    two arms of the "Y" are 50-pin 3-row maile D-style connectors. 
    
    I have a customer that wants to connect to CPE that has a female DB25;
    in other words, he needs a cable with a male DB25 on one end and a
    female 50-pin 3-row d-style connector on the other end to connect to
    the Y-cable that comes with the DNSES.
    
    Can someone give me a part number for such a beast?  Thanks in advance,
    Jim