[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4240.0. "Display Problem with MCM X620 on NT040 HinoteCT475" by ATYISA::CARRAYROU () Thu Feb 27 1997 12:58

    
    
    I use the field test x6.20 ( Multichassis Manager)
    
    I am poor so I use my Hinote CT475 with NT040 ,and the video driver
    from Hinote Ultra2  
    
    "Chip video accelerator 64300 64310 65545 65548 65550 from chip & 
    Technology inc )  
     
    
    All display are correct except when I use the LAN interconnect Option 
    
    The display is too long , when i move the window i can see the slot 1-6
    and partially slot 7 . I never saw  the slot 8.
    
    
    Thanks

T.R	Title	User	Personal Name	Date	Lines
4240.1		CSC32::16.63.96.231::Goodwin	Brad Goodwin - NSIS	`Thu Feb 27 1997 13:07`	6
	Ran into the same problem, unfortunatly for that version, you need to set your display to 800x600 and use small fonts. Don't know if this will improve with V1.1 ClearVISN when it is released. Brad
4240.2	cv 1.1a LAN interconnect fits on 640x480	NETCAD::MOWER		`Sat Mar 01 1997 23:19`	11
	The LAN interconnect window did require more than 640 (width) pixels for several "x" versions of MCM. We decided this was not a good choice, and reverted to a LAN interconnect view that would fit in 640. The LAN interconnect window in the shipping clearVISN v1.1a version will fit on a 640x480 screen. Carl Mower clearVISN LAN interconnect
4240.3	ONLY 640*480	ATYISA::CARRAYROU		`Tue Mar 04 1997 07:54`	12
	My PC with NT40 support ONLY 640*480 The new driver from chips and technogies crash my PC . Where can i find the clearVISN v1.1a kit ?? Does this kit include MCM V6 thanks Regards Didier