[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4218.0. "Illumination of MAM display ..." by BERFS4::NORD () Wed Feb 19 1997 02:37


	Good morning, good afternoon, good evening and all the times between
	such a day has,


	a customer and I, we have a small problem:

	The LCD display of the MAM isn't illuminated, it illuminates only,
	if we connect a module to the backplane and stays illuminated since
	the selftest of this new module is passed. If we disconnect a
	module from the backplane, the display illuminates the short time
	for displaying "module removed".

	Where to look and what to swap?

	Any help is appreciated

	Wolfgang Nord
	MCS@BEO@GERMANY

T.R Title User Personal
Name Date Lines

4218.1 NETCAD::DOODY Michael Doody Wed Feb 19 1997 09:32 7

T.R	Title	User	Personal Name	Date	Lines
4218.1		NETCAD::DOODY	Michael Doody	`Wed Feb 19 1997 09:32`	7
	Very interesting. Never heard of such a failure. This is certainly a hardware failure of the MAM card (to which your LCD display is attached). It probably is the only thing that needs to be swapped. -Mike

Very interesting. Never heard of such a failure. This is 
certainly a hardware failure of the MAM card (to which your
LCD display is attached). It probably is the only 
thing that needs to be swapped.


-Mike