[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3834.0. "Flex channel mapping" by DECPRG::PRMCS2::csfr::kupka () Wed Sep 04 1996 06:02

I have a question about mapping to 12 DEChub 900 flex channels.

Do the "old" repeater modules - PORTswitches 900, DECrepeaters 900, etc.  - 
map to flex channels 6-12 (2-wire)?
If yes, are there any restrictions? I would expect only FW upgrade, is this 
right?

Thanks,
Tomas
T.RTitleUserPersonal
Name		DateLines
3834.1NO SupportCONSLT::BUZZELLWed Sep 04 1996 13:307
    
    NO support for the additional 6 Ethernets on any of the original
    DECrepeater or PORTswitch modules. Only the VNswitch and new repeater
    will provide connection. It requires more hardware NOT JUST a firmware
    upgrade.
3834.2Thanks.DECPRG::PRMCS2::csfr::kupkaThu Sep 05 1996 03:523
Thanks for clarification.

Tomas
3834.3STRWRS::KOCH_PIt never hurts to ask...Thu Sep 05 1996 17:496
    
    however, remember now with the new VNswitch 900 modules, you can
    attach to the thinwire, 6 old flex channels and 5 new flex channels
    from the new switch. So, this lets you put a second VN900 module in and
    connect to the last new flex channel for a total of 13 Ethernets (1
    thinwire, 6 old flex, 6 new flex).