| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Why doesn't MutiChassis Mgr V5.0 recognize a DECserver 90L+ and a
DECserver 90TL on the LAN Interconnect screen?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3826.1 | STRWRS::KOCH_P | It never hurts to ask... | Fri Sep 06 1996 18:21 | 2 | |
Any info on this?
| |||||
| 3826.2 | CSC32::D_PERRIN | Mon Sep 09 1996 16:43 | 2 | ||
Mine does, as long as I stop/restart MCM or enable polling AFTER
the decserver is put in the hub.
| |||||
| 3826.3 | refresh MCM front panel, then LAN interconnect | NETCAD::MOWER | Tue Sep 10 1996 14:12 | 13 | |
I also _do_ see the 90L+ and 90TL, if they have been inserted into the hub
before invoking MCM.
Remember that if you insert modules while MCM and the LAN interconnect
view are already up, you must first refresh MCM's front panel view
(options->polling->refresh), and then refresh LAN interconnect (by hitting
the refresh button); the refreshes _must_ be performed in this order, if
you expect to see the newly-inserted module.
Carl Mower
clearVISN engineer
| |||||