[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3792.0. "clrVSN ROUTER MANAGER TFTP SERVER" by GIDDAY::STANISLAUS () Thu Aug 15 1996 11:01

    
    	I installed the version Win 95 version clrVSN 1.0 Kit and I could
    use Multichassis Manager and Flash Loader and quite well upgrade DEChub
    900 modules (after invoking the tftp server in Router Manager), last
    week. My PC was used by someone else for a while, but all he did was
    installed office S/W such as Microsoft Word and Power Point etc.
    I can still use Multichassis manager and Flashloader to show F/W revs
    of modules. But I am unable to start the tftp server. When I run the
    Router Manager, I get a big red/grey Logo screen saying AUTO BAHN
    ROUTER MANAGER and then a I get an ICON on the bottom of the screen
    saying STONEY BROOK Router Manager. I don't see any TFTP server ICON
    as I used to see last week.
    
    	How could all this happen. Could someone have installed some other
    version of clrVSN ? I don't want to reinstall the whole thing again if I
    can avoid it.
    
    
    Alphonse
T.RTitleUserPersonal
Name		DateLines
3792.1Someone played with my autoexec.batGIDDAY::STANISLAUSThu Aug 15 1996 22:5413
	
	I found someone who used my PC commented out 3 lines in AUTOEXEC.BAT.
Don't know who and why he it.

	rem SET WSAVERS=1.1
	rem AutoBahn-C:\ClearVIS\PROBEW
	rem NSHOME=C:\clearVIS\FIRMWARE

	Not being a PC wizz, I removed the above 3 comments and tftp server
works OK. I did not try one line at a time so I do not know which line would
have fixed it.

Alphonse