| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
The DEChub 900 chassis MIB variable chasSlotModuleVersion contains
blanks for modules inserted in slots 1-8 (should'nt the firmware
version for each module be there ...)
-Charlie
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3786.1 | Chassis mib says both hardware & firmware... | NETCAD::BATTERSBY | Fri Aug 09 1996 17:08 | 16 | |
chasSlotModuleVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the version/revision level for
this module's hardware and firmware. If not available,
this value is a zero-length string."
- From the description, it looks like it's supposed to contain
both the hardware and firmware info. Don't know why you're
seeing blanks though.
Bob
| |||||
| 3786.2 | Seeing blanks ... | NCMAIL::SCHEID | Thu Aug 15 1996 09:23 | 1 | |
Can Anybody tell me why these fields are blank ??? | |||||
| 3786.3 | Individual modules must provide the info | NETCAD::MILLBRANDT | answer mam | Thu Aug 15 1996 18:24 | 20 |
The hub MAM supports these fields. When one is blank, it is because the module in that slot did not report a value when queried. A random sampling of hubs here shows version numbers supplied by: - DECconcentator 900MX at V3.x - DECrepeater 900 at V2.x - DECrepeater 90FS, 90TS at V2.x - DECswitch 900EF at V1.6.x Earlier versions may also support this. Modules that do not provide this field include: - All other DECrepeater 90 modules - DECserver 90 family All these modules do supply information for the chasSlotModuleDescr objects. Dotsie | |||||