[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3772.0. "Trouble with Clearvisn router manager" by GIDDAY::MORETTI (Death is just a formality) Mon Aug 05 1996 23:37

    
    Has anyone had problems loading Clearvisn onto a DECpc 433W which is
    running Windows95 ?
    
    I have formatted my disks TWICE and reloaded '95 four times and
    Clearvisn untold times with the same result whereby if I start the
    Router Manager application up it brings up the Stonybrook icon and
    drops out.
    
    I have loaded this product many times on many different platforms but
    this is the first time this has happened with no obvious way around it.
    
    A few times it seems to have something to do with the ODBC driver but
    most times this installs fine.
    
    Any ideas ?
    
    Thanks in advance
    
    John Moretti
    Brisbane
T.RTitleUserPersonal
Name		DateLines
3772.1FixedGIDDAY::MORETTIDeath is just a formalityTue Aug 06 1996 00:2422
    
    I finally found the error of my ways !!!
    
    Just in case anyone else has this problem I had better let you know
    what I did.
    
    I had 2 drives C and D with windows95 installed on the D drive and WFW
    installed on the C drive.
    
    It seems that when Clearvisn updated the autoexec.bat and config.sys
    files it was creating these in the D:\WINDOWS directory but the files
    that needed updating were the ones in the C:\ directory.
    
    After I copied these files to the C:\ directory from the D:\WINDOWS
    directory all came good.
    
    Just another gotcha ...... need to pay attention more often tot the
    screens.
    
    Cheers
    
    John