[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3726.0. "ClearVisions error with gateway" by SCAMP::BUKOWSKI () Thu Jul 18 1996 17:32

    
    I think I found a bug in ClearVisions V100_32.zip
    When trying to set the gateway address of a switch 900EF, I get
    a error window saying "GenericErrors SNMP response".  Am I doing
    something wrong, or is it the software?
    
    The switch is running V1.6.1 of firmware.  I'm also having a problem
    with RMON Manager trying to connect to the switch.  It comes back
    saying "Cannot communicate with Agent", but I'm able to look at it via
    multichassi manger.  any clue?
    
    Thanks Mike.
    
T.RTitleUserPersonal
Name
DateLines
3726.1More infoNETCAD::FORINOFri Jul 19 1996 15:185
I assume the first problem involves MultiChassis Manager - is this correct?

For the second, did you check that your community string is correct?

								John
3726.2NETCAD::GALLAGHERFri Jul 19 1996 15:312
    Also for problem #2 - have you assigned an IP address to the switch?
    
3726.3Still brokeBRAT::BUKOWSKIMon Jul 22 1996 12:0211
    
    I was trying to set the gateway address of the 900EF via MultiChassi
    Manager.
    
    RMON: I have the proper read, and write communitiy names set as well as
    having an ip address defined for in-line managemt (It responds to
    multichassi manager).  I get the error when trying to look at "traffic
    monitor", "data capture", and "protocol manager".  Does 1.6.1 allow
    full RMON capabilities?
    
    Mike
3726.4What's the filename of the rev 1.6.1 image?NETCAD::BATTERSBYDon't use time/words carelesslyMon Jul 22 1996 12:1210
    <---- RE: .3
    I suspect that you may have the basic RMON image (4 basic groups),
    that I think was released recently. I'm not sure if the full
    RMON image is released yet. Someone else may be able to chime in
    here verifying whether the full RMON image is available yet.
    Perhaps if you provide the file name of the image loaded to the
    DECswitch it would then be apparent what RMON coverage your
    DECswitch has.
    
    Bob
3726.5defba161.binSCAMP::BUKOWSKIMon Jul 22 1996 17:426
    
    I'm using the firmware version that was released with the 1.0 release
    of ClearVisions.  The file name is defba161.bin
    
    Is There a full RMON version available under beta????  I would like to
    test it out.  Thanks, Mike
3726.6You have the image with the free 4 basic rmon groups...NETCAD::BATTERSBYDon&#039;t use time/words carelesslyTue Jul 23 1996 10:295
    Mike, yes you have the 1.6.1 rev of DEFBA code with the 4 basic
    rmon groups thrown in for free. I don't know what the status of
    the full rmon image is. I'll contact you off-line.
    
    Bob