T.R | Title | User | Personal Name | Date | Lines |
---|
3726.1 | More info | NETCAD::FORINO | | Fri Jul 19 1996 15:18 | 5 |
| I assume the first problem involves MultiChassis Manager - is this correct?
For the second, did you check that your community string is correct?
John
|
3726.2 | | NETCAD::GALLAGHER | | Fri Jul 19 1996 15:31 | 2 |
| Also for problem #2 - have you assigned an IP address to the switch?
|
3726.3 | Still broke | BRAT::BUKOWSKI | | Mon Jul 22 1996 12:02 | 11 |
|
I was trying to set the gateway address of the 900EF via MultiChassi
Manager.
RMON: I have the proper read, and write communitiy names set as well as
having an ip address defined for in-line managemt (It responds to
multichassi manager). I get the error when trying to look at "traffic
monitor", "data capture", and "protocol manager". Does 1.6.1 allow
full RMON capabilities?
Mike
|
3726.4 | What's the filename of the rev 1.6.1 image? | NETCAD::BATTERSBY | Don't use time/words carelessly | Mon Jul 22 1996 12:12 | 10 |
| <---- RE: .3
I suspect that you may have the basic RMON image (4 basic groups),
that I think was released recently. I'm not sure if the full
RMON image is released yet. Someone else may be able to chime in
here verifying whether the full RMON image is available yet.
Perhaps if you provide the file name of the image loaded to the
DECswitch it would then be apparent what RMON coverage your
DECswitch has.
Bob
|
3726.5 | defba161.bin | SCAMP::BUKOWSKI | | Mon Jul 22 1996 17:42 | 6 |
|
I'm using the firmware version that was released with the 1.0 release
of ClearVisions. The file name is defba161.bin
Is There a full RMON version available under beta???? I would like to
test it out. Thanks, Mike
|
3726.6 | You have the image with the free 4 basic rmon groups... | NETCAD::BATTERSBY | Don't use time/words carelessly | Tue Jul 23 1996 10:29 | 5 |
| Mike, yes you have the 1.6.1 rev of DEFBA code with the 4 basic
rmon groups thrown in for free. I don't know what the status of
the full rmon image is. I'll contact you off-line.
Bob
|