[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3682.0. "printing the manuals gives errors" by BERFS4::NORD () Fri Jul 05 1996 12:23


	Good morning, good evening and all between to the fans of
	clearVISN,


	having copied over the files CLR_OVR.PS, CLR_INS.PS and CLR_USE,
	source was NAC::NIPG:[CLEARVSN.MANUALS], I was unable to print the
	first two files to our LPS20 here in the office without an error:

	CLR_OVR.PS gives:
	DCPS-W-UNDEF, undefined: Name not known - offending command is
					Level2ImagesError
	DCPS-E-Flushing, Rest of Job (to EOJ) will be ignored

	after "clearVISN Overview 1-3"

	CLR_INS.PS gives:
	DCPS-W-UNDEF, undefined: Name not known - offending command is e
	DCPS-E-Flushing, Rest of Job (to EOJ) will be ignored

	after "Post Installation Tasks 3-12"
	Ok, the installation manual seems to be complete, but what's with the
	"USE"-manual?

	Is this problem known?

	Thanks in advance

	Wolfgang Nord
	MCS at Berlin at Germany
T.RTitleUserPersonal
Name		DateLines
3682.1Printer ProblemNETCAD::DAYMon Jul 08 1996 13:2814
    
    Hello,
    
    The error you are receiving is due to the fact that you are
    trying to print from a printer with less than 32 mg of ram.
    
    The graphics are complex and require 32 mg ram to print. You
    will not be able to print the manuals otherwise.
    
    I copied the manual from the web and had no problem printing it.
    
    Regards,
    Cynthia