|
> Can you ping the AW90?
Yes, I can ping the AW90 but the hubwatch and router manager cannot
communicate to AW90's SNMP agent. I tried to use Netview's snmpwalk to
test the AW90 and it can get the snmp data from the AW90.
Any ideas ?
Rgds,
ivan Cheng
snmpwalk
--------
# snmpwalk 16.157.32.103
system.sysDescr.0 : DISPLAY STRING- (ascii): RtAbt Acces EW/MP,
Brouter: 1 Enet 2T1,HW=1,RO=1,#4650,SW=V01.1.003
system.sysObjectID.0 : OBJECT IDENTIFIER:
.iso.org.dod.internet.private.enterprises.dec.ema.sysobjid.brouters.4.1
system.sysUpTime.0 : Timeticks: (5201748) 14:26:57.48
system.sysContact.0 : DISPLAY STRING- (ascii): digital
system.sysName.0 : DISPLAY STRING- (ascii): mcs900ew2
system.sysLocation.0 : DISPLAY STRING- (ascii): mcs900ew2
system.sysServices.0 : INTEGER: 72
interfaces.ifNumber.0 : INTEGER: 4
interfaces.ifTable.ifEntry.ifIndex.1 : INTEGER: 1
interfaces.ifTable.ifEntry.ifIndex.2 : INTEGER: 2
interfaces.ifTable.ifEntry.ifIndex.3 : INTEGER: 3
interfaces.ifTable.ifEntry.ifIndex.4 : INTEGER: 4
interfaces.ifTable.ifEntry.ifDescr.1 : DISPLAY STRING- (ascii):
:
:
Network Diagram
---------------
+---+ +---+
| | AW90 | | Clearvisn v1.0
+---+ +---+ win95
| |
--+-------------------
ethernet
AW90 version
------------
Config>list config
RtAbt Acces EW/MP, Brouter: 1 Enet 2T1,HW=1,RO=1,#4650,SW=V01.1.003
Error Message :
-------------
- Using IP address, direct communicate to AW90 :
"No response from the agent"
- double clicks the AW90 module which is inserted to HUB900 :
"No agent specified for the slot MAC address -"
"please check log messages in the Message Box windows"
(Message Box - (E) Cannot Contact Agent)
SNMP CONFIG :
-----------
SNMP user configuration
SNMP Config>list all
SNMP is enabled
Trap UDP port: 162
Community Name Access
-------------------------------- -------------------
public Read, Write, Trap
Community Name IP Address IP Mask
-------------------------------- --------------- ---------------
public 16.157.0.214 255.255.255.0
Community Name Enabled Traps
-------------------------------- --------------------------------
public Cold Restart
Community Name View
-------------------------------- --------------------------------
public All
There are no views
IP configuration
----------------
Routing
route to 0.0.0.0,0.0.0.0 via 16.157.32.1, cost 0
Protocols
BOOTP forwarding: disabled
Directed broadcasts: enabled
ARP Subnet routing: disabled
RFC925 routing: disabled
OSPF: enabled
Per-packet-multipath: disabled
RIP: enabled
RIP default origination: disabled
Per-interface address flags:
intf 0 16.157.32.103 Send no routes
intf 1 IP & RIP are disabled on this interface
intf 2 IP & RIP are disabled on this interface
Accept RIP updates always for:
[NONE]
EGP: disabled
|