[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3617.0. "900FP compatilibity" by PRSSOS::PEYRACHE (Jean-Yves Peyrache Country Support Group France) Wed Jun 12 1996 15:30

    
      Hello
    
      About Compatibility,
      i've tried to configure Portswitch900FP (V2.2) link to DECbridge90FL
      unsuccefully, link leds comes on , traffic seems pass thru, but
      i can't downloaded a Decserver90M through this connection.
    
     does somebody know if really 900FP works with older 90FL ? even
     if they are Base FL compliants together
    
      thanks in Advance for any help
    
      JYP
T.RTitleUserPersonal
Name		DateLines
3617.1Download failures usually mean BAD MEDIA.MSDOA::REEDJohn Reed @CBO = Network ServicesThu Jun 13 1996 00:0910
    That configuration (900FP to Bridge 90FL) is in use at several of my
    customer sites.  My 900FP are all at V2.0.0, (with the ThinWire issue)
    but besides that work nicely.
    
    Check out your port counters on the repeater, and the DECbridge. 
    Perhaps something strange happening on the ThinWire backplane.  Why are
    you downloading a DECserver 90M?   What does it's counters look like? 
    IS it running NAS v1.5 or higher?
    
    JR
3617.2V2.0 = OKPRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceThu Jun 13 1996 08:409
 Thanks for you input,

 all counters from Bridge and Portswitch seems look ok,
 downgrade 900FP to V2.0 solved the problem,

 i'm going to test with a new 900FP (should be an hard problem)
 stay tuned..

 JYP