[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3613.0. "clearVISN Router and Netview NT" by NETRIX::"[email protected]" (NS Austria) Wed Jun 12 1996 07:20

Hello,

ClearVISN Router Manager provides a special(?) SNMP-Server, and the release
notes say we have to shut down the Windows-NT SNMP service. Since this service
is required to install Polycenter Netview NT what is the correct way to get it
to run?
When i start Routermanager while running Netview NT i get an error message that
the snmp-trap port is already in use and cannot be initalized, after that RM
hangs.
So, how can this be fixed and what about the integration into Netview?
I cannot launch RM from within Netview.

Any help on this
Robert

PS: I am using PNV 3.1 and ClearVISN baselevel 17

[Posted by WWW Notes gateway]
T.RTitleUserPersonal
Name		DateLines
3613.1Urgent response required pleaseNETRIX::"[email protected]"Murray PennoSun Jun 16 1996 18:1212
Hi,

I am also having trouble with this one.  We have two customers that we need to
get going with PNV and Clearvisn in combination.  The Router Mgr SPD says that 
PNV is optional software but I am uable to see how they fit together.

Any help appreciated

regards

Murray Penno
[Posted by WWW Notes gateway]
3613.2Whats going on ???NETRIX::"[email protected]"NS AustriaFri Jun 21 1996 02:5112
Guys,

I am a little confused about the things going on here. Where are the guys
from the clearVISN team, and why dont we get answers.
We are running in heavy troubles here with our Polycenter Netview NT 
customers if those things dont work. So why dont you give us *any* message
or update?
Do the clearVISN guys work together with the Netview guys?

Please provide some information
robert 
[Posted by WWW Notes gateway]
3613.3DocumentationULYSSE::MORALESManuel @VBE DTN 828-5383 | NPBU EuropeFri Jun 21 1996 06:058
Robert,

I don't have PNV-NT installed, but I just printed the clearVISN configuration
and use manual and there is a paragraph on using clearVISN with NMS (PNV,
Openview etc).

Look at note 3640.1 for a pointer to the documentation on the Web.
3613.4a joke ???NETRIX::"[email protected]"NS AustriaSat Jun 22 1996 15:3920
Thanks Manuel for the pointer(page 4-7 in the Configuration and use manual)

<<Note:
...
<<If you start another application, such as Router Manager or RMON Manager,
<<an error message appears because the trap is already owned. Exit the NMS 
<<application to make the port available and then start Router Manager or
<<RMON Manager.

Hey, is this a joke???
This should be an integration, to stop an enterprise Management application
and then start another Management tool. This cant be true. 
Do you think our customers will agree with this sort of integration?
Stonybrook (the company who wrote the Routermanager) *did* an integration 
into Netview NT, so why dont we?

any comments and hopefully some clarification
robert
Network Services
[Posted by WWW Notes gateway]
3613.5Anyone tried ManageWORKS?SNOFS1::KHOOJEANNIEPoles are the best post-impressionistsTue Jul 23 1996 03:0110
    Firstly, what is being planned for the integration of Router Manager into
    Polycenter???
    
    And secondly, has anyone tried using ManageWORKS/ServerWORKS and Router
    Manager together - does it have the same problems, and what level of
    integration can you get?
                
    Thanks
    Jeannie
3613.6Some answersNETCAD::FORINOThu Aug 08 1996 19:1824
You do not have to shut down the SNMP Server.  That release note
didn't get taken out until after the field test.

For the error on the SNMP port do the following:

Create a file named RMSERV.INI in the directory where clearVISN
Router Manager is installed.  This is what should be in
RMSERV.INI:

	[Ports]
	Trap Port = 0 
	SNMP Port Overide = 1

Add the following section to your WIN.INI file, preferably just
after the [StonyBrook Router Manager] section.  Please make sure to type 
this section exactly as it appears below:
	
	[RouterManager Server]
	DataDirectory=D:\clearVIS\

The DataDirectory should equal the path where clearVISN Router Manager was
installed.

						John
3613.7In c:\clearvis ...NETRIX::&quot;[email protected]&quot;Scott HudsonSat Aug 10 1996 01:354
Put RMSERV.INI in \clearvis, not in \clearvis\autobahn.

Scott
[Posted by WWW Notes gateway]