[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3607.0. "Clearvisn/Roamabout access point, how to load.." by PTOJJD::DANZAK (Pittsburgher �) Tue Jun 11 1996 09:02

    Going to customers, wanted to upgrade Roamabout access point with
    current SW before going to service customer, tried CLEARvisn, did not
    find TFTP server.  Did activate Router manager but TFTP ICON could not
    be brought out of menu bar. (double clicking on it did nothing)
    
    Tried with older Netrider loader...would not load even tho access point
    was in BOOTP table of NETrider loader.
    
    Noted that FIRMWARE was ointed to CLEARVIS/FIRMWARE, repointed NETrider
    loader but would not load.
    
    Gotta go to appointment...any suggestions as to CLEARVISN load sequence
    for ROAMABOUT access point?  Also, difficult to find ADMIN/ADMIn
    password for CLEARvisn.....didn't get many clues when brought up
    application..
    
    REgards,j
T.RTitleUserPersonal
Name		DateLines
3607.1One thing that worksCONSLT::BUZZELLTue Jun 11 1996 17:5313
    
    John,
    
         I didn't try a Roamabout but I just did the MAM and 2 modules 
    without any problem. Activated Router Manager and canceled on username
    screen. This put TFTP server in the bar and NO you can't do anything
    with it but it is running. Then activated Flashloader and input IP
    address and did show. Then you have to put the IP address of the PC
    in the TFTP server field if this is the first time you have started it.
    Then pressed load and everything was hunky-dory. Hope this gets you
    going.
    
    Ed
3607.2Works with NetRider LoaderSNOFS1::KHOOJEANNIEPoles are the best post-impressionistsWed Jun 12 1996 01:0912
    I haven't tried it with clearVISN, but with the NetRider Loader, what
    works for me is to put the file (v22.bin or whatever) into the
    c:\netrider\load directory and in the TFTP Server, have a mapping
    between the request filename of DEFAULT and the response filename of,
    for example, v22.bin.  As far as I know, the RoamAbout looks for
    DEFAULT when it is upgraded.
    
    There are also a lot of notes on upgrading in the Wireless conference.
    
    Jeannie