Conference netcad::hub_mgnt

3580.0. "clearVISN with GS/ATM - ft questions" by RDMCS3::STUART (Scott Stuart - NPB SE - 410.315.9954) Mon Jun 03 1996 10:20

    I installed clearVISN X10_14_32B  - for WIN95 and have few questions. 
    The GS/F works great, the GS/A interface is not complete.
    ...scott
    
    I installed router manager, multichassis manager, flash loader
    
    router manager - needed a password and did not see any place to enter
    one, or a default.  
    
    1) Is there a default username/password or is there a special license 
    I must have?
    
    
    2) multichassis manager - GS/ATM
    
        for traffic summary - 
    a.)  only displays ports 1.1-3.2, while we have cards in slots 1-4, so we
    should have 1.1-4.4.  
    Is there a way to expand this window or start at a higher slot?
    
    b.) all counters are 0 - is this because of the problem with the GS/A
    mib counter ifinoctets?  
    Will this be fixed in the released version of clearVISN or a later version
    or GS/ATM firmware or clearVISN?
    
    	port display
    
    c.) all active links are labeled NNI links while we have 1 NNI and
    the rest are end system links (router ports).  
    The incative links are shown correctly.  
    The true NNI link also shows the ip address of the upstream GS/A 
    which is nice.
    
    

    Where should I post this question?
    
    
    ...scott

    >>>    1) Is there a default username/password or is there a special
           license I must have?
    
    Once you've installed router manager, use username/password of Admin.
    
    Rgds
    Jeannie

    thanks . Thats works great.  Now for the ATM answers.
    
    ...scott