| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
The customer has provided us a DECrepeater 90FA without the manual.
Pardon me if the answer is in the manual.
When I place the 90FA in slot 7, the power LED is on. When I place it
in slot 3, the LED is off even though the # LED is on. Is this a
problem? I plan on using only the fiber ports.
Thanks,
Leland
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3550.1 | STRWRS::KOCH_P | It never hurts to ask... | Wed May 22 1996 20:33 | 3 | |
It must be in slot 7 or 8 to use the AUI. Don't know whether another
slot makes the fiber active.
| |||||
| 3550.2 | Fiber works in slot 2 | ACISS2::WELLS | Thu May 23 1996 01:33 | 5 | |
We hooked up the fiber tonight and it works with the module in slot 2.
The power light is still not on. I'm still interested in knowing if it
should be or it won't light unless the module is in slot 7 or 8.
Leland
| |||||
| 3550.3 | NETCAD::GERHARDT | Out of Control | Thu May 23 1996 11:47 | 3 | |
I will assume that you are plugging it into a DEChub 90.
12 V power only goes to slots 7 and 8 in the 90. 12V goes to all slots
in a dechub 900. the circuitry is checking for 12 V.
| |||||
| 3550.4 | Thanks | ACISS2::WELLS | Thu May 23 1996 22:16 | 6 | |
Thanks for the answer. It is a DEChub 90.
I have a DECrepeater 90FS manual and it is interesting that its LED
lights when the module has 5 v of power.
Leland
| |||||
| 3550.5 | NETCAD::HERTZBERG | History: Love it or Leave it! | Fri May 24 1996 15:49 | 8 | |
The 90FS DC OK LED is designed to NOT light when the module is not
receiving 12V power. Additionally, if the 90FS is placed in a DEChub
90 in any slot other than slot 7 or 8, the firmware realizes that no
12V power is available and flashes the FRU OK LED.
When no 12V power is available on a 90FS, the backplane thinwire port
is not functional, the front-panel AUI port has no power for an
external MAU, and the Flash code store cannot be updated.
| |||||
| 3550.6 | Other than that... | JULIET::yosmte::HARRIS_MA | Sales Executive II | Fri May 24 1996 15:55 | 5 |
RE: -.1
...But other than that Mrs Lincoln, how was the play?
M
| |||||