[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3535.0. "Hubwatch in OpenView problem." by NPSS::MOREL () Thu May 16 1996 09:47

    Howdy,
    
    	I have a customer running HP-UX/OpenView who is trying to launch
    Hubwatch from this application.
    
    	He is able to launch, but unable to manage the device (GIGAswitch)
    represented by the icon, and the following error message is displayed:
    
    HUBwatch:
       You have not specified an SNMP agent to be managed.  The agent
       name or its IP address must be specified, either on the command
       line or in the resource file.  HUBwatch command line syntax:
            hubwatch -a <agent_name> -x <adrs> -c <comstr> ...
    
       For more information, type "man hubwatch".
    -----------------------------------------------------------------------
    
    The customer thought that launching Hubwatch for a particular icon
    would also include the appropriate information necessary for the
    command line arguments.
    
    	- Is this true?
        - What file would contain this information for the icons displayed
          in OpenView?
        - Where might I find more specific information about configuring 
          Hubwatch in OpenView?  I have looked through the WEB page and 
          have found very little regarding the configuration of Hubwatch 
          in OpenView.
    
    Thanks in advance for any help.
    
    
    
    				Yeow,
    
    
    
    				Mike
T.RTitleUserPersonal
Name		DateLines