[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3525.0. "ClearVisn not started" by HGOVC::SHUMCF () Fri May 10 1996 12:01

    When we upgraded the AGL2+ of Gigaswitch/FDDI to ver 3.0.1, the
    Multichassis Manager of ClearVisn could not be started with error
    (exception access violatio 0xC0000005 and address 0x00474480). However,
    the ClearVisn can be started again without the AGL2+ but with FGL2 and 
    FGL4 on (all are with ver 3.0.1)
    
    Please explain will it be the new MIB of AGL2+ not being loaded to the
    beta version of ClearVisn.
    
    Thanks/regards,
    CF Shum
    HK NS
T.RTitleUserPersonal
Name		DateLines
3525.1Some QuestionsNETCAD::DRAGONMon May 13 1996 14:0511
    
    Hi,
    
    	What version of MCM are you running? Also, was the FW upgrade to
        the AGL2+ the only change made? Did MCM experience a crash prior
        to the AGL2+ upgrade?
    
    Regards,
    Bob
3525.2MCM crashHGOVC::SHUMCFTue May 14 1996 10:3812
    The version of MCM is beta X.5.0.1 which is installed from a gold-plate CD
    brought by the NPBU people. The MCM still works with FGL2 and FGL4
    upgraded with the latest ver. 3.0.1. After we put the AGL2+ with ver
    3.0.1. The MCM exhibits the error and can not started. However, MCM can
    work without AGL2+(ver 3.0.1)
    
    Hope it can help you to identify the problem.
    
    Thanks/regards,
    CF Shum
    HK NS
3525.3NETCAD::DRAGONTue May 14 1996 14:014
    
    Thanks for the info.
    
    Bob
3525.4License needed for x1015_32.zip?NETCAD::BATTERSBYDon't use time/words carelesslyTue May 14 1996 17:005
    we're trying to install clearvisn x1015_32.zip and we're getting
    prompted for a license number. We were under the impression
    that one wasn't needed (IE: just enter CR).
    
    Bob
3525.5Read the release notes!SLINK::HOODYour bad news bearTue May 14 1996 17:060
3525.6I'm only da messenger :-)NETCAD::BATTERSBYDon't use time/words carelesslyTue May 14 1996 18:104
    Thanks, I'll pass that on to the person out in our lab who
    asked me. 
    
    Bob :-)
3525.7NETCAD::DRAGONWed May 15 1996 09:329
    
    re:.2
    
    I believe that the crash which you're experiencing may be related to
    a bug we had drawing certain PMD types in an AGL card. You may want 
    to try the latest baselevel.
    
    Regards,
    Bob
3525.8latest baselevel wantedHGOVC::SHUMCFThu May 16 1996 12:056
    Hello Bob,
    
    Would you provide a pointer for me to download the latest baselevel.
    
    Thanks/regards,
    CF Shum