| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
The MIBs on the MAM contains the lan interconnect status, that is the
network topology of the hub. Is there any where within HUBwatch a copy
of this info. If not, other than taking pen and pad to hand, how can
you save or copy this info. The question is, if this module breaks and
you need to replace it, how can you save this info before walking off
site.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3495.1 | CSC32::D_PERRIN | Tue Apr 30 1996 11:20 | 4 | ||
Clearvisn resilience or a pen and paper are the two choices, I think.
See other notes in this conference on the Resilience product (soon
to have a new name...)
| |||||
| 3495.2 | use clearVISN Recovery Manager | NETCAD::MOWER | Mon May 13 1996 14:52 | 20 | |
> The MIBs on the MAM contains the lan interconnect status, that is the
> network topology of the hub. Is there any where within HUBwatch a copy
> of this info. If not, other than taking pen and pad to hand, how can
> you save or copy this info. The question is, if this module breaks and
> you need to replace it, how can you save this info before walking off
> site.
Use clearVISN Recovery Manager. Perform a complete backup by selecting the
hub900 manager, and all slots in the hub; an immediate restore would be a
good idea to guarantee the validity of the backup.
Do not even entertain the thought of using pen & paper to record the state
of hub900 backplane connectivity - I'd place your odds of success via this
route at less than 1%.
Carl Mower, enginner for
clearVISN MCM / LAN interconnect
& Recovery Mgr / LAN interconnect
| |||||