[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3486.0. "Decbridge90 and SNMP management in DH900" by BELFST::BELCOO::HOUSTON (Peace at last) Tue Apr 23 1996 12:24

Hello.

I have recently purchased a DECbridge90 and have installed it into 
my 
DEC900 in slot 3.

When I open Hubwatch I can see the bridge but if I try to manage it 
Hubwatch gives an error saying that the MAC address in slot 3 does 
not have 
an SNMP agent assigned to it.

Is the DECbridge90 manageable using SNMP in a DEC900 ?

Regards,

Colin
751 4062

T.R Title User Personal
Name Date Lines

3486.1 You need a DECagent 90. SLINK::HOOD Your bad news bear Tue Apr 23 1996 18:26 11

T.R	Title	User	Personal Name	Date	Lines
3486.1	You need a DECagent 90.	SLINK::HOOD	Your bad news bear	`Tue Apr 23 1996 18:26`	11
	You need a DECagent 90 somewhere on your lan to manage a DECbridge 90. The DECbridge 90 is not an SNMP device; the DECagent 90 translates between RBMS and SNMP. Then, create a community for the DECbridge 90 in the DECagent 90, and add a record in the HUBwatch agents file for the DB90. For complete details, see the HUBwatch installation manual. Tom Hood clearVISN

    You need a DECagent 90 somewhere on your lan to manage a DECbridge 90.
    The DECbridge 90 is not an SNMP device;  the DECagent 90 translates
    between RBMS and SNMP.  
    
    Then, create a community for the DECbridge 90 in the DECagent 90,
    and add a record in the HUBwatch agents file for the DB90.
    
    For complete details, see the HUBwatch installation manual.
    
    Tom Hood
    clearVISN