| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3435.1 | | NETCAD::DOODY | Michael Doody | Wed Apr 10 1996 10:34 | 6 |
| You didn't mention what firmware the the hub and 900EF had. You should
run the latest firmware when running the latest hubwatch.
I'll let Tom answer about running on windows NT.
-Mike
|
| 3435.2 | | MFRNW1::SCHUSTER | Karl Schuster @RTO OMS Munich Germany | Thu Apr 11 1996 03:16 | 7 |
| All modules have the latest firmware !
I mentioned in .0 that HUBwatch for Digital UNIX works very well in the
same environment. Until now we did the whole configuration from the
UNIX system: 1 Gigaswitch, 25 HUB900, 30 Stackables
Karl
|
| 3435.3 | Not yet. | SLINK::HOOD | Your bad news bear | Thu Apr 11 1996 14:32 | 13 |
| Karl,
Intel binaries cannot be run on Alpha systems. One possible suggestion
would be to use FX!32, but even there, you need a 32-bit binary
executable.
Version 5 of HUBwatch (aka MultiChassis Manager) supports Windows/NT on
Intel, and a port to Windows/NT on Alpha is definitely planned.
So, for the short-term, you're out of luck I'm afraid.
Tom Hood
clearVISN eng
|
| 3435.4 | WNT - ALPHA soon? | CSC32::HOEPNER | A closed mouth gathers no feet | Tue Jul 02 1996 16:21 | 15 |
|
I realize this was written in April. Is there an update on
Hubwatch (Clearvision) on WNT -ALPHA.
I have a hard time justifying telling our customer who just bought a
whole farm of 4100's to run WNT that they need an INTEL or a UNIX
box to manage their hub.
Where does this need for a NT Alpha kit need to be escalated?
THanks.
Mary Jo
WNT Support
Colorado Springs
|
| 3435.5 | The usual answer | SLINK::HOOD | Your bad news bear | Tue Jul 09 1996 16:06 | 7 |
| Work is underway on the Alpha NT port.
> Where does this need for a NT Alpha kit need to be escalated?
The product manager is Jack NAC::Forrest.
Tom Hood
clearVISN eng
|
| 3435.6 | Runs under FX!32... | MBSVAX::SLOAN | | Fri Jul 12 1996 21:14 | 4 |
| FWIW clearVISN will run on Alpha under FX!32. I have it running on
an AlphaStation 500 and and Alpha 2100 4/200.
/Shaun
|
| 3435.7 | NT V4.0 & Alpha? | LEMAN::JRS | John SHADE - 'Attila the Nun' | Mon Jul 15 1996 10:57 | 5 |
| Anyone managed to get the ClearVISN stuff running with NT V4.0 Beta2?
I get the error "setup requires a different version of windows". The
same thing happens if I try installing under FX!32 (I've got sn Alphastation).
-John
|
| 3435.8 | Running under V4.0 RC1.3... | MBSVAX::SLOAN | | Tue Jul 16 1996 06:25 | 5 |
| I have running on an Alpha XL 266 under FX!32 b0078b. You need to run
setup from a command windows after setting processor_architecture=x86,
and it should install OK.
/Shaun
|
| 3435.9 | Install works from the command window; not by double-clicking in explorer | LEMAN::JRS | John SHADE - 'Attila the Nun' | Wed Jul 17 1996 04:38 | 8 |
| RE: .-1
Thanks for the top-tip. Running setup from the command window worked fine (no need
to specify architecture type). So, there's a difference between launching setup by
clicking on the file in explorer (doesn't work - complains about the version of
windows), and launching it by running it in the command window (which does work).
-John
|