[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3428.0. "DECswitch 900EF as S/M connected to 2 S's" by ASABET::nqsrv316.nqo.dec.com::feinstein (Eric Feinstein) Fri Apr 05 1996 18:57

Is it possible to configure a DECswitch 900EF with both front bezel FDDI 
ports as M and S, then connect two systems with SAS MMF (DEFPA-AA) 
"S" to the EF M and S ports.

Thanks
T.RTitleUserPersonal
Name		DateLines
3428.1NPSS::WADENetwork Systems SupportMon Apr 08 1996 10:3616
    I'd suggest that you leave the EF ports as A&B (default) and connect
    the two DEFPAs to them.  
    
    
    		DAS
    	     A      B
    	     |	    |
	     |	    |
    	     S      S
    
    Works fine and is a valid config.
    
    
    Bill