[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3424.0. "hubwatch for gigaswitch?" by SCASS1::GALVIN (The Energizer Bunny's Trainer...) Wed Apr 03 1996 13:41

    	Hubwatch for a GigaSwitch
    
    How do I setup management of a GigaSwitch?  I have a loaner with 2 FDDI
    cards.  I have no ethernet...  I tried setting an IP address on all
    cards/ports of the gigaswitch hoping to just, hubwatch -x 'ip_address'.
    
    Does anyone have any ideas?
    
    thanks,
    
    /Mic
T.RTitleUserPersonal
Name		DateLines
3424.1NPSS::MDLYONSMichael D. Lyons DTN 226-6943Wed Apr 03 1996 14:165
       ...that should be sufficient.  As I mentioned in the similar note in
    the GIGASWITCH notes conference, you should read note 265.1 in the
    GIGASWITCH notes conference to check for the common mistakes...
    
    MDL
3424.2Get the MAC and the keysPTOJJD::DANZAKPittsburgher �Fri Apr 05 1996 11:278
    Remember, the GIGASWITCH uses the MAC address as community
    string....and you need to be connected to the FDDI to manage it....
    
    (The MAC address is on the front of one of the cards and note also that
    they KEYswitch must be in the proper position - there is a position
    that disables all SNMP access....!)
    j