| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3385.1 | You need HW for Windows 4.1.2 | NPSS::WADE | Network Systems Support | Thu Mar 21 1996 08:59 | 5 |
| Looks like your using HUBwatch for Windows 4.1.1. Take a look in note
#2990 for a pointer to HUBwatch for Windows 4.1.2.
bill
|
| 3385.2 | | NPSS::WADE | Network Systems Support | Thu Mar 21 1996 09:01 | 5 |
| Note #2878 describes the problem that exists between The DECswitch EF
routing code and HUBwatch for Windows 4.1.1.
bill
|
| 3385.3 | Thanks, (decnet pointer?) | IJSAPL::VISSER_A | | Fri Mar 22 1996 08:32 | 5 |
| Thanks for the fast responce,
Is there a decnet pointer for this location?
Anton.
|
| 3385.4 | Read note # 2.4 | NETCAD::BATTERSBY | Don't use time or words carelessly. | Fri Mar 22 1996 10:31 | 5 |
| Anton, I believe note #2.4 has pointers for what you're looking
for.
Bob
|
| 3385.5 | | NETCAD::DOODY | Michael Doody | Fri Mar 22 1996 11:14 | 5 |
| Actually no, note #2 has firmware pointers. Hubwatch for windows is
note #8. Take a look at note #8.7
-Mike
|
| 3385.6 | | NPSS::WADE | Network Systems Support | Fri Mar 22 1996 11:53 | 12 |
| For DECnet access to the HUBwatch for Windows 4.1.2 kit -
bhub(55.91)::"/var/users/ftp/hubw_pc/disk1"
disk2
disk3
Use the exchange utility when copying the binary files to VMS.
Have fun,
Bill
|
| 3385.7 | | NPSS::WADE | Network Systems Support | Fri Apr 26 1996 10:11 | 19 |
|
In .5 I stated -
For DECnet access to the HUBwatch for Windows 4.1.2 kit -
bhub(55.91)::"/var/users/ftp/hubw_pc/disk1"
disk2
disk3
The directory, hubw_pc, is incorrect and points to the 4.1.1 kit. The
correct directory for 4.1.2 is -
bhub(55.91)::"/var/users/ftp/route_pc/disk1"
disk2
disk3
Bill
|