[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3383.0. "DECagent90 upgrade question" by DEKVC::YOUNGCHANKIM () Wed Mar 20 1996 19:29

Hello,

I have some questions about DECagent90 firmware upgrade.
A customer has purchased 10 DECagent90 which will be install remote HUB90.
So I was prepared setup environment for easily firmware upgrade in HUB900. 

First,Can I upgrade using by HUBloader which has installed 
during HUBwatch V4.1.1 software install.
In this case,DECagent90 has installed in HUB900.
firmware version is DENMA301.sys.
After install and IP setting,I'll be delivery to remote office one by one.

Second,Can I use notebook(Digital) which has 3com PC-MCIA for firmware upgrade ?
In this case,which one is correct method (HUBloader or DECNDUP) ?

Third,Some DECagent90 is not communicate to console.
In this case,Can I upgrade on CCI prompt ?

YCkim
T.RTitleUserPersonal
Name		DateLines