[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3338.0. "Can you do remote config of Gigaswitch/FDDI with HUBwatch ?" by JOBURG::NICOP (Nico Pretorius) Thu Mar 07 1996 10:06

We've have a customer that wants to configure his Gigaswitch/FDDI
from HUBwatch but the configuration menu is greyed out. He is 
running v4.1 of HUBwatch for OSF. OSF version is 3.2. Should this 
option be available?

Thank you for any replies.

Nico

T.R	Title	User	Personal Name	Date	Lines
3338.1	"Configure" doesn't apply to a GIGAswitch	SLINK::HOOD	They call me MISTER Dilbert.	`Thu Mar 07 1996 11:44`	7
	The "Configure" menu is designed to add or delete non-autodiscovered DEChub modules from a DEChub 90 or 900. It doesn't apply to a GIGAswitch. What exactly is your customer trying to configure for a GIGAswitch? Tom Hood clearVISN
3338.2	They want to assign	JOBURG::NICOP	Nico Pretorius	`Mon Mar 11 1996 07:38`	9
	Tom, The customer wants to assign IP addresses to the individual modules. He basically wants to perform any of the functions that you can perform from the console port from the HUBwatch. Is it perhaps possible to start a Telnet session to the GIGAswitch to give you a "remote console"? Thanks Nico
3338.3		NETCAD::DRAGON		`Mon Mar 11 1996 08:15`	7
	Nico, Telnet is not supported to GIGAswitch/FDDI via HUBwatch. Bob
3338.4	Remote Port on Gigaswitch	TIMABS::BACHMANN	Ronny Bachmann - CS Basel Switzerland	`Thu Mar 21 1996 16:30`	8
	Hallo Nico , Use reverse LAT or VCS /PCM to get the remote Port on the Gigaswitch accessible . Regards Ronny