[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3337.0. "Dechub90 Screws do not fit" by CHEFS::BEVIS_S (I've had my payrise carbon dated) Thu Mar 07 1996 09:26

    Hi,
    Is any one else getting this problem? 
    
    We seem to be supplying DECHUBs 90 backplanes with two versions of
    the back panel, 74-41865-01 rev B02 and B03. The unpainted fabrication
    is the rev B03 and the painted version is rev B02.
    
    The trouble is that the screws supplied, that fit the back panel to the
    rack mount brackets, only fit the rev B02. It appears that the B03 has a
    different thread and the screws haven't been changed to fit this new
    thread.
    
    I know that this is a small problem, but it is a source of iritation to
    the customer, who often demands a new backplane.
    
    Is manufaturing (or the persons who assemble the bits prior to
    dispatch) aware of the problem? 
    
    thanks in anticipation
    
    Steve Bevis
T.RTitleUserPersonal
Name		DateLines