[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3329.0. "How do I attach a DEChub900 to a DELNI???" by SCASS1::GALVIN (The Energizer Bunny's Trainer...) Wed Mar 06 1996 09:43

    		Connect a DEChub900 to DELNI
    
    We've got a dh900 with a DECswitch900 that's got routing turned on.  I
    setup the AUI port, (#2) and have it connected to a DELNI.  It's setup
    for IP and the IP address is 166.34.121.239 and my mask is
    255.255.255.0
    
    I tried to configure port #3 to be a 166.34.114.X network with hopes
    that I could use a 32port repeater and set it up as a 166.34.114.X
    LAN.
    
    I want the DECswitch to act as a router, but I can't get it to
    recognize the repeater... 
    
    Can someone point me to reading material or answer my question?  How do
    people attach a DEChub900 if they are using a DELNI?
    
    thanks,
    
    /Mic
T.RTitleUserPersonal
Name		DateLines
3329.1CSC32::B_GOODWINMCI Mission Critical Support TeamWed Mar 06 1996 12:197
Mic,

It should work ok, I've done it. Are you sure port 3 is connected to the same
lan interconnect on the hub backplane as the repeater? To see this, look in
hubwatch view menu and select lan interconnect.

Brad