[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3327.0. "hubloader protocols ??" by GIDDAY::MORAN () Wed Mar 06 1996 00:33

    When you use hubload to upgrade the firmware in a 900 module or hub -
    what protocols are used (bootp - tftp ????)
    
    The reson for this is because the customer has many very REMOTE sites
    that have DECHUB 900 hub with 900 modules in them. These units have not
    been upgraded in firmware for almost 2 years !!!!
    
    What I want to to be in the customers head office and use hubload to
    update the firmware on these remote hubs.
    
    The WAN connections is via CHDLC betwwen a DECNIS 600 and a DECBROUTER
    90 (V9 IOS).
    
    Any ideas if this will work ????
    
    Thanks in advance - Shaun

T.R	Title	User	Personal Name	Date	Lines
3327.1	routing IP is necesary	BARNA::DSMAIL		`Wed Mar 06 1996 12:36`	4
	you only need that WAN links route IP, then SNMP does the rest. Jordi Manchon