| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
i try to setup a concentrator900MX powered by a dechub-one ( not the MX type ) to have the 6 front ports as M ports : kind of NAC setup ( Null attachment Conc ) from the setup port , i can switch between A/B configuration to M/S configuration and so i end up with ports 1 to 5 as M ports , and port 6 as S port ; now with OBM port , i run HUbwatch 4.1.1 and conc900mx with 3.2.2 firmware ; but when i click into the Configuration window form the Summary window , i only get "No reponse from the agent " is it possible to do such a setup ? thanks for your help PJ
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3303.1 | NETCAD::DOODY | Michael Doody | Mon Feb 26 1996 10:23 | 13 | |
I don't know why you got the "no response" message from Hubwatch, maybe
it is a communication problem to the OBM port.
As for your configuration, NO, you cannot have 6 front panel M ports
because you do not have a onehub-mx.
My suggestion is to leave the concentrator at default (AMMMMB). If you
have SAS workstations, an S-A and S-B connection is okay. If you have
DAS connections, you will have a B-A connection for the first
workstation, then use the A ports on the rest of the workstations.
(A-M and A-B).
-Mike
| |||||
| 3303.2 | ok for getting back to A-B front | TOOPCS::SELLES | Fri Mar 01 1996 09:19 | 10 | |
thanks Mike for your help next time i go to customer , i will set the configuration back to AB front instead of MS as in this case i lose 1 port ( port 6 ) as it is configured as S port and i risk ending up with a S-S connection as the customer only uses SAS connections from its stations -PJ | |||||