Conference netcad::hub_mgnt

3284.0. "900 EF Crash:2380/2008/23C0" by ZUR01::ACKERMANN () Thu Feb 15 1996 08:39

    
    
    DECSWITCH 900EF Crash Codes:2380/2008/23C0
    ------------------------------------------
    
    I have a Customer with Following Config:
    
    HUB MAM Version 4.1.0
    1x DECswitch 900EF Version 1.5.2
    1x Portswitch 900TP Version 2.1.0
    
    On the Backplane he has 3 LANS. These are connected to 3 individual 
    Ports of the DECswitch 900EF and the Portswitch 900TP.
    
    Now he gets intermittend Resets of the DECSWITCH 900EF with the
    above Crash Codes:2380/2008/23C0
    
    Entry #       = 3
    Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty,4=crc_error
    Entry Id      = 10
    Firmware Rev  = 1.5
    Reset Count   = 16
    Timestamp     =    0    1  FAE
    Write Count   = 7
    FRU Mask      = 0
    Test ID       = DEAD
    Error Data    = SR=2409 PC=0007B702 Error Code=00002380 ProcCsr=F56D
    Registers     = D0=D80080D0 D1=00000300 D2=00000001 D3=00000D0
    D4=00000080 D5=00000000 D6=00000000 D7=0000FF80
    A0=0416E084 A1=00002080 A2=00028240 A3=0416E074
    A4=0610000E A5=03025D42 A6=0002AF50 A7=0004B8B0
    
    Dump another entry [Y]/N? y
    Entry #       = 2
    Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty,
    4=crc_error
    Entry Id      = 10
    Firmware Rev  = 1.5
    Reset Count   = 15
    Timestamp     =    0    6 F216
    Write Count   = 7
    FRU Mask      = 0
    Test ID       = DEAD
    Error Data    = SR=2000 PC=0307AF78 Error Code=00002008 ProcCsr=7D6D
    Registers     = D0=00000012 D1=0000007F D2=00000009 D3=00000000
    D4=00000000 D5=00000000 D6=00000000 D7=0000FFFF
    A0=00000048 A1=00068E1C A2=00068E1C A3=02000000
    A4=0002B580 A5=0007D94C A6=0004B860 A7=0004B808
    
    Dump another entry [Y]/N? y
    
    
    Entry #       = 1
    Entry Status  = 0   [0=valid, 1=write_error, 2=invalid, 3=empty,
    4=crc_error
    Entry Id      = 10
    Firmware Rev  = 1.5
    Reset Count   = 14
    Timestamp     =    0    4 888B
    Write Count   = 7
    FRU Mask      = 0
    Test ID       = DEAD
    Error Data    = SR=2400 PC=0007B6DC Error Code=000023C0 ProcCsr=3D6D
    Registers     = D0=D8008059 D1=0000AB00 D2=00030000 D3=00000059
    D4=00000080 D5=00000000 D6=00000000 D7=0000FF80
    A0=04416084 A1=00002080 A2=00028810 A3=04416074
    A4=0610000E A5=01FE0080 A6=0002A420 A7=0004B8B0
    
    Please has anybody any Idea, what the Reason for these Crashes could
    be ?
    
    Thanks for any Help
    
    Daniel MCS Switzerland
    

    As usual, we need much much more information on the configuration
    of your LAN. IE: what devices (types of end nodes), & in general 
    what kinds of protocols are connected to the LANs coming into the
    HUB?
    There is insufficient information to say what is wrong.
    
    Bob

    
    
    Hello Bob,
    
    Thanks for Your fast Response. I can give You some more Details
    about the Configuration, where the Crashes happen. (2380/2008/23C0)
    There are only 3 Modules used in that Hub.
    
    
    
    DECSERVER 900TM Slot 5 NAS 1.5 BL95C
    
    DECSWITCH 900EF: Slot 8
    ----------------
    
    
    Port1 ----------- FDDI External to other HUBs
    Port2 ----------- External to DELNI standalone with some DECSERver 200
    Port3 ----------- Thinwire Connected to BP
    Port4 ----------- LAN Segment 1 BP
    Port5 ----------- LAN Segment 2 BP
    Port6 ----------- LAN Segment 3 BP
    Port7 ----------- External to H4005---DELNI--- 3x DECSERVER 200
                                            \_____ DESPR 3x PC on Tinwire
    						   1 Workstation Clus. Sat.
     
    
    Portswitch 900TP: Slot 7
    ------------------------
    
    LAN 1 ----------- Group1 (10 Ports) 8 PCs Connected
    LAN 2 ----------- Group2 (10 Ports) external no Connections
    LAN 3 ----------- Group3 (12 Ports) external no Connections
    
    Thinwire is NOT Connected
    
    - The most Protocol they use is LAT on DECSERVER 200
    - On the PCs they use TCP/IP
    - 1 Workstation Cluster Protocol
    
    
    Thanks for any Help again,
    
    Daniel MCS Switzerland