[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3281.0. "Config. sanity check" by GNOMO::JOSEF (Jose Fernandez. ACT Spain) Thu Feb 15 1996 02:58

Hi,

I need to configure the following scenario:


		+-----------+
		|           | DECCONCENTRATOR 900
		|           |
		+-----------+
                 M| 
                  |
                  |(long distance)
                  |
                  |                    +---------+
                  |  +-----------------|         | VAX WITH FDDI CARD
                 S|  |M               S|         |
		+-----------+          +---------+
		|           |
		|           | DECSWITCH 900 EF
		+-----------+
	
The customer doesn't want to install a DECconcentrator 900 to connect just
one VAX.

Is it correct? Will it work? Any comment is welcome.

Thanks in advance,
Jose
T.RTitleUserPersonal
Name		DateLines
3281.1Peruse note #2340 for more FDDI config rules....NETCAD::BATTERSBYThu Feb 15 1996 09:515
    It's fine. Tell your customer to go for it.
    By the way, you may want to look at note #2340 to familiarize
    yourself with the FDDI configuration rules.
    
    Bob