[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3264.0. "GPPE error with 4.1.1" by QCAV02::CHENTHIL () Mon Feb 12 1996 02:20

    Hi ,
    
    
    Facing a problem with hubwatch software.It is giving general protection
    error.When we try configuring the hubwatch software with MS TCP/IP the
    application starts but often it stops in between with an incomplete GUI
    screen.At times it works but comes up with an error message
    
    "General Protection Error Caused By The Application Hubwatch"
    
    software Version
    
    Dos 6.22
    Windows For Workgroups 3.11
    Hubwatch 4.1.1
   DE205 card
    
    Could someon help out me in this problem.Any inputs would be highly
    appreciated.
    
    
    Best Regards
    CHENTHIL

T.R Title User Personal
Name Date Lines

3264.1 I had the same problem NETRIX::"[email protected]" Steven Freke Mon Feb 12 1996 07:41 17

T.R	Title	User	Personal Name	Date	Lines
3264.1	I had the same problem	NETRIX::"[email protected]"	Steven Freke	`Mon Feb 12 1996 07:41`	17
	Chenthil I had the same problem last week. There were a few things suggested 1) is the line set WSAVERS=1.1 in your autoexec.bat? It needs to be in there before you start windows. It would be a good idea to put it in the place as all the other hubwatch vairables. 2) What kind of PC do you have? There is a problem with the Dell Pentiums because of a deffective chipset. (SC3 I believe). I think the fault only becomes apparrent when running certain software, hubwatch being one of them There is a TIMA article which talks about this, and it is entitled: {Elev} Windows V4.1.1 Has major memory Leak! Have a read of that it may be helpful. regards Steven Freke [Posted by WWW Notes gateway]

Chenthil
	I had the same problem last week. There were a few things suggested
1) is the line set WSAVERS=1.1 in your autoexec.bat? It needs to be in there
before you start windows. It would be a good idea to put it in the place as all
the other hubwatch vairables.

2) What kind of PC do you have? There is a problem with the Dell Pentiums 
because of a deffective chipset. (SC3 I believe). I think the fault only
becomes apparrent when running certain software, hubwatch being one of them
There is a TIMA article which talks about this, and it is entitled:
{Elev} Windows V4.1.1 Has major memory Leak!

Have a read of that it may be helpful.

regards
	Steven Freke
[Posted by WWW Notes gateway]