| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I just received 2 DEChub 900's with firmware V4.1.1, but can't
find any mention of it in this conference. Are my search methods
really that bad (cock gun, advance finger toward trigger....),
or is 4.1.1 something that hasn't been brought up yet?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3232.1 | DEChub V4.1.1 | NETCAD::MILLBRANDT | answer mam | Mon Feb 05 1996 10:11 | 23 |
This release is primarily for manufacturing - in their procedures,
diagnostics were failing. It contains two bug fixes to the V4.1.0 release.
- Power source failover. When a hub is operating from AC line
voltage and also has battery backup present, the hub will
automatically switch to the DC backup if AC power is removed.
When AC power is restored, the hub will switch back to using
the AC input. These events can be monitored with the Event
Log, available on the Setup Console. As these events are
not product errors, they are not recorded in the Error Log.
In a future version, these events will be passed to Hubwatch.
- Manufacturing mode diagnostics. A fix was made to reinitialize
the time processing unit between diagnostic test passes.
I checked the network sites. Under the Network Product Business web page
(http://npbwww.hpn.lkg.dec.com) there is a dmhub411 kit and release notes.
The gatekeeper firmware directory, however, still has dmhub410. I'll
find out why and have it updated.
Dotsie
| |||||
| 3232.2 | Thanks! | SCCAT::MILLER | Mon Feb 05 1996 13:00 | 2 | |
Thanks - I had checked this notes file and gatekeeper, but I hadn't
checked the NPB web page.
| |||||
| 3232.3 | NETCAD::DOODY | Michael Doody | Fri Feb 09 1996 09:12 | 7 | |
As a reminder,
http://npbwww.hpn.lkg.dec.com/ is for internal only.
Customers can use http://www.networks.digital.com/
Currently the firmware is located at
http://www.networks.digital.com/npb/dr/hubs/firmware/index.html
| |||||