[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3230.0. "hubwatch for openview" by MSE1::RAO () Fri Feb 02 1996 13:13

    
    I have installed HUBWATCH (v4.1.2) for HP-UX 
    which works fine if I invoke hubwatch by itself
            #hubwatch -a xx -x 16.x.x.x -c public
    
    But if I try to launch it from HP opnview ( i have the dechub symbol on
          all the hubs, I have agent file which has rwx protection)
    
     but still I get the following error.........
    
    HUBwatch for HP-UX, Revision V4.1.2
    ---------------------------------------------------------------------------
    HUBwatch:
       You have not specified an SNMP agent to be managed.  The agent
       name or its IP address must be specified, either on the command
       line or in the resource file.  HUBwatch command line syntax:
            hubwatch -a <agent_name> -x <adrs> -c <comstr> ...
    
       For more information, type "man hubwatch".
    
      
          
    Thanks
    Radha
T.RTitleUserPersonal
Name		DateLines
3230.1Launch from OpenviewMSE1::RAOMon Feb 05 1996 09:268
    
    Hi,
         I need to get this working asap..please let me know if
         anyone has this working
    
    Thanks
    Radha
3230.2HUBwatch side...SLINK::HOODThey call me MISTER Dilbert.Mon Feb 05 1996 16:4111
The message you're getting is from HUBwatch. It is what is printed
when the hubwatch image is invoked without any parameters. In this
case, openview is not passing "-x nn.nn.nn.nn" to HUBwatch.

Is the hub properly registered in openview with an IP address?

I don't know anything about openview, but I'll ask the person who
does.  You should see an answer here sometime in the next day or two.

Tom Hood
clearVISN apps
3230.3workingMSE1::RAOTue Feb 06 1996 08:0316
    
    Finally got Hubwatch launched from OPenview.. The hub is properly
    registered with an IP address (xx.xx.xx.xx) and name (hub1).
    
    Eventhough from openview, if I search the hub by its name it gives
    full name/ip address... Hubwatch did not recognise the name
    
    so,  I had to change the hub's selection name
     to its IP address from its name hub1 in-order to make
    hubwatch work from openview
    
    Never have this problem from polycenter netview
    
    Radha