| The FDDI concentrator products support:
MIB-II. (RFC 1213)
FDDI MIB, (RFC 1512)
ELAN MIB,
public-common MIB
These MIBs are available via anonymous ftp from "ftp.dec.com (16.1.0.2)".
Instructions are attached.
The concentrator products support the following traps:
ColdStart
LinkUp
LinkDown (conditionally)
AuthenticationFailure
A "DEC-private" Port trap
Traps are only sent when you've given the module an IP address, and give
the module one or more "trap-sink" addresses. Both can be assigned thru
the setup-port.
If you have both in-band and out-of-band ports active then linkDown traps
are sent out the port that didn't go down.
WarmStart traps are not sent because the device doesn't warm-start (reset
such that the management parameters are unchanged).
The port trap may be enabled/and disabled via management. It indicates when
stations are attached or removed from the ring on a given port.
-Shawn
--------------------------------------------------------------------------
-- 1) Use the Internet application "ftp" to connect to
-- ftp.dec.com (Internet address 16.1.0.2).
-- 2) Log in as user "anonymous".
-- 3) Use you electronic mail address as the password.
-- 4) Change directories to the /pub/DEC/hub900/mibs area using
-- "cd /pub/DEC/hub900/mibs".
-- 5) Use the "ascii" command to specify that you are
-- retrieving ASCII test files.
-- 6) Get the README file using "get README".
-- 7) The README file explains how to retrieve this MIB.
-- It lists the latest version on the MIB. It may
-- instruct you to "cd" to another directory where
-- you can "get" this MIB.
-- 8) When you are finished, use the "quit" command to log out.
|