[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3178.0. "Hubwatch crashes when saving forw db to file" by BACHUS::GOOVAERTS () Thu Jan 18 1996 09:09

Hi,
	a customer uses Hubwatch for windows v4.1.1 to manage a Gigaswitch.
	When he tries to save the forwarding database to a file,
	he performs the following steps:

	1.Summary =>
	2.Bridging =>
	3.Forwarding Database =>
	4.File =>
	5.Select a name file and start the operation

	But he get
	
 	Application Error

	HUBWATCH caused a General Protection Fault in
	module Hubwatch.exe at 000B:3164


	If he exits Hubwatch after this message,hubwatch crashes.
	The firmware of teh Gigaswitch is 2.10 DL1.00 BB2.00

Is this a known problem??

Danny Goovaerts
TSC Brussels
T.RTitleUserPersonal
Name		DateLines
3178.1NETCAD::DRAGONFri Jan 19 1996 08:1413
    
    Danny,
    
    	Is this readily reproducible for the customer? I tried this
        here and had no problem, except for a known problem with the
        port number (always 0).
    
        How many active entries are reported for the forwarding database?
    
        Anyone else out there seen this crashing problem?
    
    Regards,
    Bob