| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3160.1 | | NETCAD::GERHARDT | Out of Control | Mon Jan 15 1996 16:18 | 14 |
|
> 1/ in which case the Decmau900TH will disconnected a ports/stations ?
the port will wrap if the attached station changes speed, is removed,
or reports beacon frames.
> 2/ About Relays on DECMAU900TM . what is the MTBF ? (numbers of
> opening/closing)
100 million opens and closes. they are the same relays that are used
in telephone systems where reliability is key.
|
| 3160.2 | more errors ? | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Tue Jan 16 1996 13:01 | 10 |
|
Thanks for these infos
about disconnection , DEmau900TH report (under HUBwatch) "duplicate active
monitor" error message.
do you know if this error force a disconnection of the port/station ?
Jean-Yves
|
| 3160.3 | | NETCAD::GERHARDT | Out of Control | Thu Jan 18 1996 15:31 | 11 |
| under which screen do you see the duplicate active monitor? the Ring
Error monitor? the ring error monitor is a display of error messages
sent to the ring error monitor address. the DTMXM receives the ring
error messages and saves them for display by hubwatch.
token ring ( not dedicated token ring) has only one active monitor.
when something happens where there are 2 active monitors ( 2 rings
joined) the protocol operated on by the token ring chips ( the DTMXM
has one) is to go into contention and work out that only one of them is
active monitor. they don't need to exit the ring ( at least my
experience with the TI chipset), but could.
|
| 3160.4 | out of the ring | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Fri Jan 19 1996 13:45 | 11 |
| >>the Ring Error monitor?
Yes, i save all errors in a file do you wa them ?
>>they don't need to exit the ring
but i my case 900TH disconnect the station (culprit station i hope)
do you think that is a normal way ?
jean-yves
|