[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3151.0. "Multiple 90TS repeaters in DECstack ... " by NCMAIL::SCHEID () Thu Jan 11 1996 22:17

    
    When multiple DECrepeater 90TS modules are in a DECstack 90
    configuration with one set as HUB master. Each 90TS has been given 
    an IP Address ... why are a majority of management features under HUBwatch 
    "greyed out" on all 90TS modules except on the 90TS acting as HUB 
    master. 
    
    Is this something that will change in the future or is this a
    limitation ... 
    
    
    Customer does'nt want 90T16's because they are not capable of providing 
    the more detailed management info (fancy gauges etc ...)
    
    
    
    
    	-Charlie

T.R Title User Personal
Name Date Lines

3151.1 Use individual IP addresses SNOFS1::KHOOJEANNIE Humpty Dumpty was pushed Thu Jan 18 1996 01:18 13

T.R	Title	User	Personal Name	Date	Lines
3151.1	Use individual IP addresses	SNOFS1::KHOOJEANNIE	Humpty Dumpty was pushed	`Thu Jan 18 1996 01:18`	13
	I think you have to manage each module individually using its own IP address, not via the stack master 90TS. When you use the stack master 90TS to look at the other 90TSs, it is using the serial management bus to interrogate the other modules. The protocol used across the serial management bus is rudimentary and cannot understand per-port security and statistics etc. However once you manage each TS using its own IP address, this is now in-band (across the thinwire bus) which uses SNMP, and you get the normal SNMP features. Jeannie

    I think you have to manage each module individually using its own IP
    address, not via the stack master 90TS.
    
    When you use the stack master 90TS to look at the other 90TSs, it is
    using the serial management bus to interrogate the other modules. 
    The protocol used across the serial management bus is rudimentary and
    cannot understand per-port security and statistics etc.
    
    However once you manage each TS using its own IP address, this is now
    in-band (across the thinwire bus) which uses SNMP, and you get the
    normal SNMP features.                                               
          
    Jeannie