[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
|
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
3141.0. "DECrepeater 900TM braindead and error codes" by NETRIX::"[email protected]" (Murray Penno) Tue Jan 09 1996 20:18
Hi,
I have a customer who has just upgraded 30 odd DECrepeater 900TMs to latest firmware. 5 repeaters seem to
have failed. When they now boot they go through self test and fail after the test that lights ports 1,2,6,7,8.
After the failure the power, network OK and Port 1 lights are on.
The repeaters still seem to repeat but there is no access to them via hubwatch or via serial management.
Where can I find the details on the selftest lights and error codes if it fails?
Does anyone recognise this problem?
Any help appreciated.
Murray
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3141.1 | | STRWRS::KOCH_P | It never hurts to ask... | Wed Jan 10 1996 07:55 | 3 |
|
I know the questions will be asked. Please post the versions of the
software involved including that of the DR900, DH900, HUBwatch, etc.
|
| 3141.2 | Software versions | NETRIX::"[email protected]" | Murray Penno | Wed Jan 10 1996 22:05 | 5 |
| Sorry, I forgot to give the software version. The version
being upgraded to was V2.0.
Murray
[Posted by WWW Notes gateway]
|
| 3141.3 | same issue... | JULIET::HARRIS_MA | Sales Executive II | Thu Jan 11 1996 01:44 | 7 |
| I had this exact same problem. Never did figure it out OR sucessfully
ever get it to BOOTP reload to any known firmware version. My module
has been dead for 3 months. Not sure what to do either.
Let us know if and how you get it fixed.
Mark
|