[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3103.0. "HUBwatch crashes when displaying to Motif T1.2-4" by FATSYS::ANDY (Andy Belsey (823) 3200) Wed Dec 27 1995 10:03

Hi,

	I upgraded my Flamingo to Motif T1.2-4 running the new CDE interface.
I now can't get HUBwatch to run when displaying to this node (HUBwatch
executes on other nodes on the network). I have tried V3.1 for VAX and V4.1.1
for Digital UNIX but when the display is set to my workstation with Motif
T1.2-4, HUBwatch crashes thus:

HUBwatch for OpenVMS, Revision V3.1.3
(I) HUBWATCH$LIBRARY = SYS$LOGIN
(W) Using community public
(W) Agent type Hub900 found for 16.196.48.250
X Toolkit Warning: No type converter registered for 'String' to 'Pointer'
conver
sion
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=94380000,
PC
=0028E57E, PSL=0BC00000

  Improperly handled condition, image exit forced.

        Signal arguments              Stack contents

        Number = 00000005                00000000
        Name   = 0000000C                20000000
                 00000000                7FE7E2A8
                 94380000                7FE7E288
                 0028E57E                000B9E21
                 0BC00000                00000001
                                         94380000
                                         94380000
                                         80540ED4
                                         0000B7E0

        Register dump

        R0 = 0600FFFF  R1 = 94380000  R2 = 00B696A8  R3 = 00045BE8
        R4 = 0000425C  R5 = 7FE7E394  R6 = 0035F700  R7 = 000001F0
        R8 = 00540ED4  R9 = 000001EE  R10= 00000000  R11= 7FFE2BDC
        AP = 7FE7E184  FP = 7FE7E144  SP = 7FE7E1C0  PC = 0028E57E
        PSL= 0BC00000

 I thought that the new Motif was at fault, so I tried displaying to a PC
running Linux and XFree86 V1.3.2 (which is an implementation of the X11R6
server). I get exactly the same crash as with the new Motif. It runs fine when
displaying to OpenVMS nodes running Motif V1.2-3 (both Alpha and VAX) and
Alpha running Motif V1.2-3.

 It seems that the intrinsics library (Xt) is getting very upset about a
String to Pointer conversion somewhere in the code. I thought at first that
Motif V1.2-4 implemented the X11R6 code but, according to the release notes,
it implements the X11R5 code just like Motif V1.2-3. I have no other display
problems to this machine with any other applications. Any ideas?

			/andy

T.R	Title	User	Personal Name	Date	Lines
3103.1	Same thing with latest FT of OpenVMS version	FATSYS::ANDY	Andy Belsey (823) 3200	`Thu Dec 28 1995 10:42`	49
	I get the same crash with the latest version of the FT for OpenVMS (bit more info here on the module causing the crash as it's been linked with traceback): HUBwatch for OpenVMS, Revision X4.1.2 (I) HUBWATCH$LIBRARY = SYS$LOGIN (D) Finished reading MIB database (I) HUBWATCH$LIBRARY = SYS$LOGIN (I) Using community "public" (I) Agent type Hub900 found for 16.196.48.250 (D) In-band agent: 16.196.48.240 [slot 7] (reachable) (D) In-band agent: 16.196.48.241 [slot 6] (reachable) (D) Using in-band agent (16.196.48.250 [slot 8]) X Toolkit Warning: No type converter registered for 'String' to 'Pointer' conver sion %SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=2D74642D, PC =003328B2, PSL=0BC00000 %TRACE-F-TRACEBACK, symbolic stack dump follows module name routine name line rel PC abs PC 003328B2 003328B2 $G$RAPHICS Initialize 38134 0000029C 002A69F8 0043C78A 0043C78A 0043CA2A 0043CA2A 0043CC9D 0043CC9D 0043CD40 0043CD40 $G$RAPHICS GraphicsCreateWidget 38265 00000023 002A6D87 0038FB34 0038FB34 0038F960 0038F960 0038F6CF 0038F6CF 0038F818 0038F818 0038F818 0038F818 0038D852 0038D852 0038D757 0038D757 HUB_GUI_FRONT_P hub_gui_fetch_dh900 88135 000006E2 00145392 HUB_GUI_FRONT_P hub_gui_fetch_hub 87747 000003BD 00143E2D HUB_GUI_FRONT_P hub_gui_fp_create 87297 00000192 00142B16 HUB_VIEW_PUBLIC hub_gui_vw_update 90954 0000019A 0015584A HUB_VW_FP hub_fp_update_done 20618 000006BC 001E8CD8 HUB_SYS_HUB900 hub_mvfp_900slot_tbl 21558 00000692 001E352A HUB_MGMT_IFC hub_req_calls 15912 00000155 00238CED HUB_MGMT_IFC hub_req_end 13991 00000066 00235AF2 HUB_MGMT_IFC hub_req_process 15012 00000863 00237473 HUB_MGMT_IFC hub_q_ireq 13882 00000254 00235850 HUB_SYS_HUB900 hub_get_cfg_hub900 20825 000001B1 001E2279 HUB_VW_FP hub_init_fp_sys 19438 000000B7 001E6923 HUB_VW_FP hub_vw_init_fp 19363 00000514 001E6674 HUB_MGMT_GIFC hub_mgmt_vw_init 11433 00000149 00233D85 HUB_GUI_FRONT_P hub_startup 87206 000005BB 00142973 ONEHUB main 95870 0000076F 00156BBB
3103.2	Still broken...	FATSYS::ANDY	Andy Belsey (823) 3200	`Wed Apr 24 1996 09:37`	10
	HUBwatch V4.1 is still broken when displaying on the SSB release of Motif V1.2-4. It accvio's on the OpenVMS version and seg faults on the UNIX version. It displays fine on Motif V1.2-3 (both OpenVMS and UNIX) and Motif V2.0 (X11R6) on Linux. People are going to be upset when they upgrade and find that this application is no longer available to them... /andy
3103.3	display problems	MSBCS::HURLEY		`Mon Feb 03 1997 15:32`	10
	I'm getting the same problem as I just upgraded over the weekend to my new unix box running 4.0... X Toolkit Warning: No type converter registered for 'String' to 'Pointer' conversion. Segmentation fault (core dumped) oh oh. Is it time to put hubwatch on my pc?? or is there a fix yet?? JOhn